Lazy 3-4 Shift

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

5 posts / 0 new

Last post

Thu, 07/25/2013 - 18:20

#1

Bill Hooper

Lazy 3-4 Shift

2009 V. I've been trying to quicken the 3-4 shift. As it is, it is 0.6 seconds long at WOT, and the timing barely drops for it. I will attach a scan file and my tune. Look at timestamps 346 and 708 for 3-4 shift points at WOT. I've tried a number of things, including the 2010 mod file trans changes for shift times and pressure times, but it doesn't seem to change it. I haven't changed everything from that 2010 mod file, but I matched the things that I thought would affect it. My tune file is also attached.

Can you provide some guideance on how to properly shorten the 3-4 shift and to firm it up? Your help is much appreciated.

Thanks!

- Bill Hooper

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.