Lay Person trying to verify tune from Tuner

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

10 posts / 0 new

Last post

Fri, 07/29/2016 - 09:45

#1

cvety

Lay Person trying to verify tune from Tuner

I had my transmission re-built and strengthened with a kit very similiar to Circle D. See attached Trans List listing parts.

The computer is a 2012 computer in a built 2011 6L90 CTSV Wagon with 750 SAE RWHP on e85 (no glory runs).

In sport mode, the 1-2 shift shudders still just a little bit, the 2-3 shift is lazy, and there is still a bit of laziness in the 3-4 shift.

ALSO, my tuner said he couldnt do a trans re-learn on a 2012 computer using HP Tuners becuase the software kept saying that the trans wasnt hot enough (at 190 degrees). Apparently, if he was able to force a trans re-learn, he thought he could all the problems to go away.

I have spend thousands on the 416LSX build and thousands on the tranny build.

Therefore, I am looking for someone to review the config file to verify that I dont have any red flags and to weigh in on the sport mode shifts. My tuner has spent hours driving the car and making minor transtunes changes, so I don't see how remote tuning is really possible unless someone is super confident in thier work. At any rate, if anyone is out there that thinks they are a good fit to 1) verify my config and 2) help fine tune it even more please let me know.

Chris

Subscribe today to see the replies on this topic.

You are here

Lay Person trying to verify tune from Tuner

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.