Click Pic to Enlarge

TCC Slip apply ramp table not working?

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

 

10 posts / 0 new
Last post
Wed, 11/20/2019 - 00:45
#1
GrannySShifting
TCC Slip apply ramp table not working?

Shows TCC slip when locking at WOT, with an odd ramp/step up in pressures that doesnt seem to correspond to anything. Tried to max out the TCC apply pressure ramp table when it shows positive slip but did exact same thing.

Is raising the regulator offset the floor minimum the only way to raise lockup apply pressure? It doesnt seem to add pressure even though it has hundreds of rpm slippage and targets 0

Top

Subscribe today to see the replies on this topic.