Click Pic to Enlarge

gear 2ed and 3rd slipping

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

 

33 posts / 0 new
Last post
Sun, 03/21/2021 - 11:47
#1
Rayan_v8
gear 2ed and 3rd slipping

Hello Wacker

I have my car issue and friend caprice, 2009 and 2012 6l80 trans, I have tow problems

1- at dyno the 4th gear slipping after second run with fully comanded locked

2- when i tested the car in the street, the second and third  gear with tcc line pressure zero, after 4th gear the line pressure is working

you can see the 1st vcm at dyno the tcc line pressure is 110 psi, and the second run was 0 line pressure !!!

note: both of cars is same issue

plesae help

Top

Subscribe today to see the replies on this topic.