G ears magazine bind up article

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

5 posts / 0 new

Last post

Sun, 03/21/2021 - 21:21

#1

turbomike

G ears magazine bind up article

https://gearsmagazine.com/magazine/6l80-bind-after-2-3-shift/

What are your thoughts on this? I know that the clutch clearance on the 3-5r is probably too tight, but have you ever seen this kind of behavior from the TCM elsewhere? Where it pulses a solenoid after entering a gear?

And what config could I use to get logs like this? Do you have any logs where I can see the solenoid pulsing on shifts?

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.