6l80 tutd

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

15 posts / 0 new

Last post

Mon, 07/19/2021 - 16:28

#1

DTES

6l80 tutd

Is it possible to completely eliminate safety shifts to run the transmission fully manual by maxing out the tutd shift speeds in HP tuners for offroad racing use ?

at the moment safety shifts kick in when you really don't want them to.

it also drops out of 6th gear when at 85mph which is 4000rpm and wont let you back into 6th unless you slow down again.

Using a tcm2650 as the engine is running aftermarket management

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.