Fresh rebuild L90E & still getting old codes

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

4 posts / 0 new

Last post

Mon, 03/14/2022 - 10:36

#1

Turbocoupe

Fresh rebuild L90E & still getting old codes

Code is P2715 pressure control solenoid D stuck on (permanent)

Last year I was getting this code, which somehow ended up smoking my transmission and led to it overheating. I bought the rebuild kit from circle D and had it rebuilt. First time taking the car for a drive and its not shifting, and Im getting the same P2715 code. I tried clearing the code, and I can hear something click in the trans...but no fix.

Is this something that is gonna require me replacing the entire TCM?

Subscribe today to see the replies on this topic.

You are here

Fresh rebuild L90E & still getting old codes

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.