g8-gt Trans flare

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

2 posts / 0 new

Last post

Tue, 01/10/2023 - 01:03

#1

Rayan_v8

g8-gt Trans flare

Hello

I have trans flare in all 2009 - 2010 caprice - g8gt - when I installed force induction project-Larg injectors- ETC

I saw this in your 6l80 Articles

This is the beginning of a flare. Notice the RPM is starting to increase with a drop in TCC slip and no relative rise in MPH. There are a few causes for this. The first and most common is an incorrect torque signal. Usually after engine modifications we see this kind of flare as the delivered torque is skewed in the wrong direction. Most commonly the MAF has been adjusted for various engine mods to include larger injectors. Another kind of flare is from a burnt transmission. No matter what pressure and delivered torque settings are maximized, the trans will flare when the clutches become glazed or are totally destroyed.

yes I think that is happend in 2009 - 2010, after I installed larg injectors , the trans is flare,

for sure if you install larg injectors the maf/ cylinder air mass will not read property good

this model for ECU we cannot modify the flow rate for injectors, is maxed to 63.5 LB/h

so, plesae let me know if there any way to solve the trans flare !!

plesae advice

Thanks

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.