2013 caprice PPV setup in a 66 GTO

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

36 posts / 0 new

Last post

Thu, 07/19/2018 - 14:53

#1

hpt4127

2013 caprice PPV setup in a 66 GTO

hey all just rebuild this 6L80e trans, with extra clutch and no wave in 3/5/R no rubber spacers and extra clutch in the 4/5/6 stock plates, sonnax LB1 kit and Zip kit. Has Circle D single disc billet converter around 3200 stall. Build these transmissions all the time have 0 EXP in tunning them. Wondering if anyone can help me with this thanks. Oh also previous tuner disabled TCC because it was slipping so i know that

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.