2015 GMC stock truck tune

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

26 posts / 0 new

Last post

Sun, 05/01/2016 - 01:56

#1

DDTECH

2015 GMC stock truck tune

I'm helping a buddy with his truck - just bought it, bone stock. Would like to get alittle bit more out of it. This is the stock tune i pulled, and i modded it slighly because he's running 93. Trans side of things is mostly stock but looking to see if we can get it to shift firm and clean a bit.

I also changed the PE table because its was pretty rich off the stock tune.

Any suggestions on actual pcm tuning though? How much timing do these things like? And what not.

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.