Hey working on a 2013 Camaro ZL1. Seems at times under light throttle it pulls too much TM timing on the shifts causing like a hiccupp in the car. I nthe log its TRans TM but not sure what to change. Torque factors are 1 and adder modifer is -1.000 up to 4125rpm. Seems to be on upshifts and some downshifts. Is it tip in management or limiit managment that I need to change to no thrrotle?. Was not sure the differance from none, no throttle or throttle only. See the log where at times says from 1100-1700 shift the timing goes to -3 to 10 degrees and causes a bit delay. File and log attached. Thanks!
5th Gen Camro ZL1-pulling too much TM timing on light throttle shifts
Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.
NEW!!!
I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.
Subscribe today to see the replies on this topic.