bpp reads invalid after cranking

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

2 posts / 0 new

Last post

Mon, 12/26/2016 - 17:06

#1

race00

bpp reads invalid after cranking

my truck is a 54 chevy ,2010truck harness and 5.3 ,2010 camro ecu and 6l80e trans 3600 stall,with the key on engine off my bpp siganal reads released and apllied as it should ,the bpp cuircuit reads released the whole time ,as soon as i crank the truck the bp cuircuit reads invalid and the signal reads released and will not change,does anyone have idea,

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.