Circle D pre upgrade service evaluation

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

6 posts / 0 new

Last post

Sun, 08/16/2015 - 09:53

#1

fasstclass

Circle D pre upgrade service evaluation

HI STEVE. IM RICARDO. GLENN RISKE FROM CIRCLE D TOLD ME TO FIRST CONTACT YOU FOR AN EVALUATION PRIOR TO DOING MY TRANS UPGRADE.

HAVE A 2010 CAMARO SS A6 STOCK 6L80E EXCEPT FOR THE PRESICION INDUSTRIES 9.5 MULTIDISC 3200 STALL TORQUE CONVERTER AND TUNE MADE BY ED HUTCHINGS.

CAR HAS A KENNEBELL 2.8LC SUPERCHARGER WITH A 18PSI PULLEY STOCK CUBE FORGED LS3 CONVERSION AND HILIFT BLOWER CAM. LAST TIME AND PREVIOUS TO ACTUAL PULLEY INSTALL HAD A DYNO READ OF 636RWHP AND 585 RWTQ ON 92 OCT PUMP GAS. STILL PENDIND A NEW READ ON THE 2-3PSI INCREASE, WATHER METH AND A 200HP WORTH OF NITROUS STAND ALONE SYSTEM.

DOING THE REBUILD AS I THINK TRANS IS SLIPPING. IF I FEATHER THE PEDAL NO TROUBLE AT ALL BUT IF I HIT IT IT REVS UP AS I MISSED A GEAR IN A MANUAL TRANS.

IM SENDING LAST LOG AND UPDATE SO IF YOU COULD TELL ME WHAT GLENN NEEDS TO KNOW.

MAIL TUNE DONE VIA HPTUNERS PRO VCM SUITE

THANKS.

Subscribe today to see the replies on this topic.

You are here

Circle D pre upgrade service evaluation

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.