Delay in reverse , no noise, no slipping

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

2 posts / 0 new

Last post

Wed, 10/26/2016 - 05:29

#1

arnors0101

Delay in reverse , no noise, no slipping

Hi

I had a 1-4/3,5,R drum cracked in my 6l80.From 2007 Escalade. It had bad shifts and bad reverse.I replaced the drum. Now all symptoms have gone away all gears and shifts are normal, except that there is a delay taking reverse. But once it takes reverse after 3-5 seconds it does not slip at all.

What could be causing this?

Subscribe today to see the replies on this topic.

You are here

Delay in reverse , no noise, no slipping

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.