Engage low / reverse clutch when in 1st gear

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

6 posts / 0 new

Last post

Mon, 05/23/2022 - 18:24

#1

hjtrbo

Engage low / reverse clutch when in 1st gear

Hi, is there a way to have the low reverse clutch to be on when the trans auto downshifts to 1st for engine braking? If I use TUTD to command 1st, I can see in the logs the low reverse clutch engages and engine braking works great but if I am in drive and it downshifts to first then it does not engage and I have no engine braking. Thanks

Subscribe today to see the replies on this topic.

You are here

Engage low / reverse clutch when in 1st gear

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.