Fast Learn Never Enables - 2012 Camaro SS

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

2 posts / 0 new

Last post

Sun, 04/14/2013 - 15:22

#1

11MeanSS

Fast Learn Never Enables - 2012 Camaro SS

Hey guys, done the fast learn a bunch of times on the 6l80 ECU's with great success (With and without stalls). Have a 2012 Camaro SS now, 3200 stall in it. When I am within the 70-95* range it will show TEMP LO, and never run the test. When I am above 95* it will show TEMP HI (Which it should).. It will never start running the tests, brake on/off, etc.

This happens with a Tech 2 OR HPTuners VCM Controls.. Always worked before even on the '12 Vettes, I just tell them its a 2010

Yes the clutch purge is still enabled. Even through in a stock trans tune just to eliminate anything that I may have removed from the program to make this work..

Subscribe today to see the replies on this topic.

You are here

Fast Learn Never Enables - 2012 Camaro SS

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.