Hitting rev limiter on 1-2 and 3-4 shifts @WOT intermittently

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

14 posts / 0 new

Last post

Thu, 02/27/2014 - 21:30

#1

forcefedv

Hitting rev limiter on 1-2 and 3-4 shifts @WOT intermittently

2009 Cts-v. Every so often the vehicle hits the rev limiter on the 1-2 and 3-4 shifts. I really noticed the issue after the cam install but it doesn't happen all the time. Should I start with using the trans. tune from the 2010ctsvmod files?

Mods are: Ls9 cam, Id850 inj.,2.5 upper, Airaid, 3" catback

Thanks

Subscribe today to see the replies on this topic.

You are here

Hitting rev limiter on 1-2 and 3-4 shifts @WOT intermittently

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.