Lazy 1-2 part throttle shifts

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

3 posts / 0 new

Last post

Sat, 04/02/2022 - 22:30

#1

BurntEndzz

Lazy 1-2 part throttle shifts

Hello,

It's me again :). i'm currently changing some things with my tune and it has dropped the torque vaues back to where they should be(they were very high before). While everything is running great, My 1-2 part throttle shift seems very lazy compared to before. With the higher torque vaues it shifted very firm, I've tried adjusting the oncoming pressure presets as well as the shift pressures, to no avail. i feel like i'm missing something. Attached is log and tune.

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.