Lazy 3 -> 4 Upshift

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

77 posts / 0 new

Last post

Sun, 07/10/2016 - 20:35

#1

DDTECH

Lazy 3 -> 4 Upshift

I figured i'd make a new thread, to not get off discussion of the last one.

My 4th to 5th has firmed up nicely. here's the log from today.. i've upped the base pressure to even try to make my 3 to 4 none lazy but its slow.. should i lower the limiter to say 6 or 6100 instead of 6300?

Attached is log and current tune file.

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.