MPH for Release of TCC

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

3 posts / 0 new

Last post

Fri, 12/07/2012 - 20:24

#1

Protec

MPH for Release of TCC

Currently using EFILive...

Lets say my 4th gear TCC engage speed is 24mph and my release is set a mph below the engage speeds (23 mph)... Everything feels great, but Ive read that the TCC release should be a minimum of 4mph below the apply speed...

What do you recommend?

Thanks,

john-

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.