Rev matching on Downshift

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

10 posts / 0 new

Last post

Sun, 10/14/2012 - 13:20

#1

RDinSD

Rev matching on Downshift

I have an 06 Vette. A tuner helped me with a tune from an 08 that has the rev matching feature. The rev matching seemed to work OK but it was actually happening a little early (revs started dropping back down before the downshift). I still have that tune but since then I have put a 440 engine with about 500 RWHP and had the engine dyno tuned. It seems like the rev matching is no longer working or is less than it was. So I guess my question is how to I make adjustments to the rev matching on downshift. My tune is a .ctd file which I cannot upload here.

Help

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.