Scaling for new injectors

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

47 posts / 0 new

Last post

Wed, 10/12/2016 - 22:29

#1

DDTECH

Scaling for new injectors

Upgrading Stock LSA injectors to FID(fuel injector devolopment) 1050s

How would i properly go through and setup the injector data on here, its a tad different then what i'm used to. I understand a full retune will be needed but i wanted to know how to properly scale the injcs.

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.