Skewed Trans Engine Torque

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

12 posts / 0 new

Last post

Tue, 03/01/2022 - 13:17

#1

BurntEndzz

Skewed Trans Engine Torque

New tuner here looking to learn!

Long story short I have a good base file to work with but wanted to learn some tuning on my own. After entering the manufacture supplied data for the injectors, I noticed I had to scale my MAF mucher higher than before, which appears to have skewed my Torque readings out of whack @ WOT. Does anyone have any advice on how to fix this? Maybe its not a big deal? As i understand this number has an affect on transmission behavior. I'm referencing the Engine Torque and Delivered Engine Torque in the attached log file. Injectors are FID 1300cc.

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.