Stall Cts _V

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

9 posts / 0 new

Last post

Mon, 12/04/2017 - 01:44

#1

Jamesbtri

Stall Cts _V

I installed a fresh 6l90 with a circle d stall 2600 to 2800 .

Few issues and main is the odd trans slip not tcc slip but trans slip . In the log it will shift into 3rd and at start of shift the trans slip will jump then settle back down . After that it happens again and fells like it shifts 3rd twice . I am so lost and this is drivng me crazy as no one has a answer .

Log file below

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.