TCC tuning

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

2 posts / 0 new

Last post

Sat, 01/10/2015 - 07:43

#1

Khaotic

TCC tuning

Question on the apply/release speed tables in Hp tuners, with after market converters with differant friction material, is it better to not have converter locked say programed at 318 or better to have locked say setting table to 1 to allow the cutch to lock on the converter hope that made sense thanks And this is on a after market single disk converter

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.