Tracking tuning ctsv

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

14 posts / 0 new

Last post

Fri, 10/28/2016 - 21:59

#1

DDTECH

Tracking tuning ctsv

Doing a buddys car.

Previous was on a radial on 19" stock rim.

Car ran great no banging.

Car now has 295/45r17 17" welds and is banging 1st to 2nd.

No other gears. It shifts every gear perfect.
Rev limit in first is 6600 / mph was 30.
I backed it down to 29 no good. Im now going to 32mph to see if it makes a different.. but theres no issues with any other gear so far

Any recommendations?

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.