Trans feels like it looses pressure at wot

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

5 posts / 0 new

Last post

Thu, 05/30/2013 - 19:35

#1

farmtruc

Trans feels like it looses pressure at wot

2011 Silverado, installed a yank3800 converter. Trans tuning was fine but at wot and over 5krpms the trans would act as if it was thrown into neutral.
For the life of me I couldn't figure it out, due to overworking and not taking a step back.

I decided to contact waker, after looking at the file, he discovered I had fat fingered a table accidentally.
I had the shift mph wot table maxed, doh!

Point is, sure does help to have another tuner to throw ideas around with.

In addition to the wot fix, i learned a few things as well. The site has been very helpful.

Thanks to steve for the tech support, looks like a good site for tech talk.

Subscribe today to see the replies on this topic.

You are here

Trans feels like it looses pressure at wot

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.