Twin Turbo VE Scaled tune

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.

6 posts / 0 new

Last post

Mon, 03/07/2016 - 01:13

#1

Vett

Twin Turbo VE Scaled tune

Hi first off I'm new to HP I've been a long time EFI user. things look very similar but thought I'd try HP this time round as a been through about 5 boxes with this engine combo.

Is there a trick to the delivered trans torque mod with HP when using a scale tune there is about 67% difference between the stock VE air flow numbers what is in my tune.

Should I just use the air mass ABCD tables and X 67% the get me back to standard then up from there?

Should I use the EQ ratio table to bring me back up to standard then use the air mass tables?

Any help would be much appreciated.

Subscribe today to see the replies on this topic.

You are here

Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.

NEW!!!

I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.