I swapped in a 6l80e off a 2010 camaro into a G8. Turned it on and all was fine for like 15 seconds then it started making a noise which to me sounded like loose converter bolts, checked them and they were all good. It makes an ugly rattling sound in the converter/bellhousing area. Its a stock converter off the same 2010 camaro. I go to drive it and it drives as if it had a stall. Revs a lot before the car even starts to move. Would low fluid cause such noise and behavior?
weird noise
Click on the "SUBSCRIBE" tab to sign up. I will not respond to technical questions unless you are a paid subscriber. Calibration and Config files will not open directly from the site, they must be downloaded to your computer in order to open.
NEW!!!
I will make one calibration change for an additional $100 per change. For example, changing a shift point for a given gear is $100 vs changing a shift point and a pressure setting would be $200. That value can be used towards the full custom tuning price.
Subscribe today to see the replies on this topic.